Touring Bike Parts List
Below is a list of all the major parts on our new touring bikes for 2004. The bikes were designed to use 26 inch mountain bike wheels but, because of a glitch in building of the frames, we are using a 700c fork (with a 26 inch mountain bike wheel). Odd as it seems, it is working because we are using disc brakes. It would not work with rim brakes since the brake bosses would be in the wrong location. A photo of the assembled bike is at the end of the list.
| Frame: Bernie Mikkelsen |
| Fork: Rockshox Metro XC (note this is for 700c wheels) |
| Hubs: Phil Wood 36 hole disk brake compat |
| Rims: Mavic XM-719 - 26 inch |
| Tires: Continental Travel Contact 26x1.75 |
| Fenders: SKS for large tires |
| Skewers: Steel, loosen with 5mm hex - not quick release |
| Handlebars: Richey Biomax, Bill - 40cm Barb - 38cm |
| Handlebar padding: from Terry Bikes |
| Headset: Chris King No ThreadSet |
| Stem: Look Ergostem |
| Aerobars: Barb only-Profile Split Second |
| Seatpost: Rockshox MTB Suspension |
| Seatpost collar: Salsa Lip Lock |
| Seat: Bill Specialized Milano |
| Seat: Barb Specialized Ti-Dolce |
| Pedals: Speedplay Frogs |
| Brakes: Avid road disk front and rear |
| Brake Levers: Diacompe compact road levers (from Terry Bikes) |
| Crank: Shimano M752 22/32/44 |
| Chain Disk (by De Woerd) to protect pants from chain |
| Bottom Bracket: Shimano for M752 Crank |
| Cassette: Shimano XT 11-34 9 spd |
| Chain: HG-93 |
| Front Derailleur: XT |
| Rear Derailleur: XT |
| Shift levers: Shimano 9 spd bar end |
| Chain watcher |
| Computer: Cateye Mity 3 |
| Front Rack: Tubus Ergo |
| Rear Rack: Tubus Cargo |
